SIGN UP TO RECEIVE UPDATES ON MX FUEL™ EQUIPMENT
Compaction
Dewatering
Cutting
Wet Concrete
Coring
Demolition
Plumbing & Mechanical
Lighting
Batteries, Chargers & Power Supplies
Compaction
Dewatering
Cutting
Wet Concrete
Coring
Demolition
Plumbing & Mechanical
Lighting
Batteries, Chargers & Power Supplies
- MX FUEL™ 20" Plate Compactor KitMXF220-2HD
- Hits harder, travels fastest
- No Gas Headaches, Greater Control
- 35 min of runtime, 5,000 sqft per charge
- Multi-direction capability for easier operation
- Fast / slow speed control
- Instant power w/ push button start
- Foldable handlebar for safe jobsite transportation and efficient storage
- Ergonomic handles for multiple person lifts
- Accessories Available: Wheel Kit, Paver Pad, and Water Tank
- ONE-KEY™ compatible: track and manage
- 2-year equipment warranty & 2-year battery warranty
- 65 minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 on the MX FUEL™ Super Charger
- Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime
- Fully Compatible with the MX FUEL™ Equipment System
- MX FUEL™ 70 kg Rammer KitMXF270-2HD
- Hits Harder, Travels Fastest
- No Gas Headaches, Greater Control
- 25 min of Runtime, Over 1/4 Mile Per Charge
- AUTOSTOP™ Control for Enhanced Safety
- Impact force: 3,799lbf
- Centralized user interface mounted on handlebar
- Start/Stop and Fast/Slow controls
- Instant power with push button starts
- No emissions, no engine maintenance
- ONE-KEY™ compatible: track and manage
- 2-year equipment warranty & 2-year battery warranty
- 65-minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 on the MX FUEL™ Super Charger
- Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime
- Fully Compatible with the MX FUEL™ Equipment System
- MX FUEL™ 1HP 2" Submersible Pump KitMXF211-1XC
- No Generator, Pumps Anywhere.
- Shuts Off At 2" w/ Auto-Mode
- 40 mins, 2,800 Gallons Per Charge on Auto-Mode
- More Efficient Pumping With Three modes (High, Auto, and Low)
- Auto-Mode: Automatically senses and adjusts to incoming flow rate
- High Mode: 27 Mins, Up to 2,200 Gallons per Charge
- Low Mode: 110 Mins, Up to 5,200 Gallons Per Charge
- Remote Notifications: Pump & Battery Status, Pumping Modes
- Portable Pump Power Base, Backpack Harness & Remote Included
- Integrated Tether & Pump Cord - 35ft Length
- Max Flow Rate: 82 gpm
- POWERSTATE™ brushless motor provides more power, more run-time, and longer life
- 2-year equipment warranty & 2-year battery warranty
- Both the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Battery & MX FUEL™ Rapid Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime.
- Fully compatible with the MX FUEL™ Equipment System
- MX FUEL™ 14" Cut-Off Saw w/ RAPIDSTOP™ KitMXF315-2XC
- 14” gas performance, No gas headaches
- RAPIDSTOP™ Blade Brake & Kickback Control
- 14 ft in concrete, 120 cuts in #5 rebar per charge
- Push button start
- Load light indicator
- No emissions
- No mixing gas and oil
- No engine maintenance
- Onboard electric water valve
- Fully compatible with the MX FUEL Equipment system
- 2-year tool & battery warranty
- 45-minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 on the MX FUEL™ Super Charger
- Both the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime
- MX FUEL™ 6" Green Concrete Saw KitMXF316-2XC
- Cut up to 1-1/2” depth on 6” blade
- No pull start, no emissions, no engine maintenance
- 160 ft per charge at max depth
- Lever on handlebars to raise and lower guide arm
- Blade depth adjustment for accurate cuts at varying depths
- Handlebar height adjustment for increased comfort
- ¾ speed mode to break in new blades
- Compatible with Husqvarna 6” Soff-Cut blades
- LED lights at blade level for increased visibility
- ONE-KEY™ compatible to track and manage
- 2-year equipment warranty & 2-year battery warranty
- Includes: (1) MX FUEL™ 6” Green Concrete Saw, (2) MX FUEL™ REDLITHIUM™ 8.0 Batteries, (1) MX FUEL™ Supercharger
- Fully compatible with the MX FUEL™ Equipment System
- 45 minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 on the MX FUEL™ Super Charger
- Both the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime
- MX FUEL™ Concrete Vibrator KitMXF370-2XC
- Power to Push 2-1/2” Head
- Eliminates Extension Cords, No Tripping Hazards
- Consolidate up to 45 yds³ per charge w/ 2” head & 14’ Shaft
- 11,200 VPM; Consistently sustains above 10,000 VPM
- Instant Power w/ Push Button Start
- Accepts shafts 7’-21’
- Lanyard hook for use when working at heights
- Compatible with Oztec heads & shafts
- Easier to use with Wireless Remote
- Shoulder strap included for convenient carry options.
- Fully Compatible with the MX FUEL™ Equipment System
- 2 Year Equipment Warranty & 2 Year Battery Warranty
- Compatible with ONE-KEY™ to Track and Manage
- MX FUEL™ High Cycle Concrete Vibrator KitMXF372-2XC
- Most Powerful, Most Consistent Consolidation
- Fastest Setup
- 130 yds³ Per Charge, w/ 7' Whip / 1.75" Head
- 11,500 VPM in the Stiffest Concrete; Consistently Sustains Above 10,000 VPM
- Only compatible with MX FUEL™ High Cycle Concrete Vibrator Whips w/ Heads sold separately
- Instant Power w/ Push Button Start
- Easier to use with Wireless Remote
- Includes: (1) MX FUEL™ High Cycle Concrete Vibrator, (2) MX FUEL™ REDLITHIUM™ 8.0 Batteries, (1) MX FUEL™ Supercharger and Remote
- 45-minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 on the MX FUEL™ Super Charger
- 2-year equipment warranty & 2-year battery warranty
- Both the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime
- Fully compatible with the MX FUEL™ Equipment System
- ONE-KEY™ compatible to track and manage
- MX FUEL™ Backpack Concrete Vibrator KitMXF371-2XC
- Power to Push 2-1/2” Head
- No Pull Start, No Gas, No Engine Maintenance
- Consolidate up to 70 yds³ per charge w/ 1-1/2” head & 7’ Shaft
- 11,200 VPM; Consistently sustains above 10,000 VPM
- Consistent Starts, Most Reliable Pours
- For use with MX FUEL™ Concrete Vibrator Heads & Shafts
- Accepts shafts 7’-21’
- Easier to use with Wireless Remote
- Easily Remove Backpack Harness for walls and columns
- Instant Power w/ Push Button Start
- 2 Year Equipment Warranty & 2 Year Battery Warranty
- Compatible with ONE-KEY™ to track and manage
- Includes two MX FUEL™ REDLITHIUM™ XC406 Battery Packs
- Compatible with Oztec heads & shafts
- Fully Compatible with the MX FUEL™ Equipment System
- MX FUEL™ Vibratory Screed KitMXF381-2CP
- Power to pull 16' bar
- No Pull Start, No Gas, No Engine Maintenance
- 2 hours per charge w/ 12' bar
- Accepts 4' - 16' bars on one motor
- Compatible with MBW screed bars
- Instant Power w/ Push Button Start
- Clamp design for easy bar attachment and removal
- Consistent Starts, Most Reliable Pours
- Compatible with ONE-KEY™ to Track and Manage
- 2 Year Equipment Warranty & 2 Year Battery Warranty
- Includes two MX FUEL™ REDLITHIUM CP203 Battery Packs
- Fully Compatible with the MX FUEL™ Equipment System
- MX FUEL™ 24" Walk-Behind Edging Trowel KitMXF324-2HD
- 5 HP performance
- No Gas Headaches
- 35 min of runtime per charge
- Max blade speed: 160 RPM
- Handlebar height adjustment for increased comfort
- Fine pitch dial for precise blade pitch adjustment
- Lift hook for increased maneuverability on the jobsite
- Includes: (1) MX FUEL™ 24” Walk- Behind Edging Trowel, (2) MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery Packs, and (1) MX FUEL™ Super Charger
- 65 minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 on the MX FUEL™ Super Charger
- 2-year equipment warranty & 2-year battery warranty
- Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime
- Fully compatible with the MX FUEL™ Equipment System
- MX FUEL™ 36" Walk-Behind Trowel KitMXF336-3HD
- 5HP performance
- No Gas Headaches
- 25 min of runtime per charge
- Max blade speed: 130 RPM
- Handlebar height adjustment for increased comfort
- Fine pitch dial for precise blade pitch adjustment
- Lift hook for increased maneuverability on the jobsite
- Includes: (1) MX FUEL™ 36” Walk- Behind Trowel, (3) MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery Packs, and (1) MX FUEL™ Supercharger
- 65 minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 on the MX FUEL™ Super Charger
- 2-year equipment warranty & 2-year battery warranty
- Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable, delivering high-speed cooling for less downtime
- Fully compatible with the MX FUEL™ Equipment System
- ONE-KEY™ compatible to track and manage
- MX FUEL™ Handheld Core Drill KitMXF301-2CP
- Pressure Gauge
- Optimize performance for different applications
- AUTOSTOP™ kickback control prevents severe kickback
- ONE-KEY™ technology allows for tracking, tool security, and inventory management
- water line and quick connect end for wet applications
- On-Board Work Lights
- LED leveling system helps users maintain accuracy through the application
- MX FUEL™ Handheld Core Drill Kit w/ StandMXF301-2CXS
- Pressure Gauge
- Optimize performance for different applications
- AUTOSTOP™ kickback control prevents severe kickback
- ONE-KEY™ technology allows for tracking, tool security, and inventory management
- water line and quick connect end for wet applications
- On-Board Work Lights
- LED leveling system helps users maintain accuracy through the application
- MX FUEL™ Breaker KitMXF368-1XC
- Limits excess vibration and provides a comfortable grip while operating
- Demolishes the most concrete per unit of time while maintaining the lowest vibration in class
- Lightest weight breaker in class
- Can break 2 tons of material per battery charge with MX FUEL XC Battery
- Delivers harder hitting performance with less vibration and weight
- Provides light at the chisel point in dark applications
- For easier transportation and maneuvering throughout the job site
- Maximum durability for the most demanding demo applications
- ONE-KEY™ Compatible: Ability to Track and Manage tools for increased productivity and investment protection
- 4.9m/s² Vibration
- 50 Ft/Lbs of Impact Energy
- MX FUEL™ Sewer Drum Machine w/ POWERTREDZ™ for 5/8“ - ¾“ Cable KitMXF501-1CP
- POWERTREDZ™ Lift Assist
- Power To Clear Roots At 200'; Mess Contained
- Fully Compatible with the MX FUEL™ Equipment System
- Clears 3” up to 8” Sewer Lateral lines
- MX FUEL™ REDLITHIUM™ CP203 Battery powers through multiple jobs on a single charge, bringing cordless mobility, saftey, and power supply to the drain cleaning industry
- Integrated Drum Brake stops drum from spinning quickly after pedal is released
- CABLE DRIVE™ Automatic Feed and Retract
- RAPID STOP™ Release of CABLE DRIVE™ Bearings
- Utilizes 5/8" & 3/4" Inner Core Cables
- Connect Two Drums Together to Get 200' Capacity
- MX FUEL™ Sewer Drum Machine for 5/8“ - ¾“ Cable KitMXF500-1CP
- Power To Clear Roots At 200'
- Mess Contained; Instant Setup
- Fully Compatible with the MX FUEL™ Equipment System
- Clears 3” up to 8” Sewer Lateral lines
- Drum Capacity: 100ft of 5/8" or 3/4" Cable
- Add Additional Cable or Connect Two Machines Together to Get 200' Capacity
- MX FUEL™ REDLITHIUM™ CP203 Battery powers through multiple jobs on a single charge, bringing cordless mobility, saftey, and power supply to the drain cleaning industry
- Integrated Drum Brake stops drum from spinning quickly after pedal is released
- CABLE DRIVE™ Automatic Feed and Retract
- RAPID STOP™ Release of CABLE DRIVE™ Bearings
- Utilizes 5/8" & 3/4" Inner Core Cables
- ONE-KEY™ capable
- MX FUEL™ Pipe Threading MachineMXF512-2XC
- Easiest Transport, Work Anywhere
- Faster, Set Up to Clean Up
- Up to (140) ¾” Threads Per Charge
- Threads up to 2” pipes
- Threads several materials including black iron pipe, stainless steel, rigid metal conduit (RMC) and more
- Compatible with most roll grooving tools
- Self contained oil reservoir reduces mess
- Durable spring assisted cart allows for easy transportation and set up around the jobsite
- Additional rear hammer chuck enables fast transitions between threading and grooving
- Durable all metal housing construction
- Micro-Adjust enables the easiest, most controlled die adjustments for consistent quality threads
- ONE-KEY™ technology allows for tracking, tool security, and inventory management
- POWERSTATE™ brushless motor provides more power, more run-time, and longer life
- REDLINK PLUS™ intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity.
- MX FUEL™ ROCKET™ Dual Power Compact Tower LightMXF040-1XC
- 15,000 Lumens for Task and Area Lighting
- Over 2,300 ft² of Coverage at 0.5+ ft-c
- Compatible with PACKOUT™ Modular Storage System for Easy Transport On & Off the Jobsite
- Compact Size and Weight Delivers Maximum Portability
- 7 Foot Mast Deploys in Seconds
- IP56: Water & Dust Protection
- Dual Power: Powered by MX FUEL™ or Extension Cord
- 2 Deployable Outriggers for Increased Stability
- Oversized Carry Handle for Easier Carrying
- MX FUEL™ Battery is Protected in a Lockable and Sealed Compartment
- ONE-KEY™ Bluetooth Card Enables Tracking, Tool Security and Inventory Management
- Fully Compatible with the MX FUEL™ Equipment System
- MX FUEL™ ROCKET™ Tower Light/Charger KitMXF041-1XC
- Easier transportation, superior ergonomics
- Integrated charger and battery storage
- Reinforced base
- Durable steel tube design
- MX FUEL™ Portable Battery ExtensionMXF010-0
- Lighter Tool Weight, Less Fatigue
- Maintains Peak Performance
- Fits All MX FUEL™ Batteries
- Up to 45% less MX FUEL™ Equipment weight
- Backpack Harness and integrated carrying handle for easy transport
- 8’ Tether Adapter fits all MX FUEL™ Equipment
- Easily remove Backpack Harness for stationary use
- Includes 8’ Tether Adapter (1008)
- Includes Backpack Harness Kit (1000)
- 2 Year Equipment Warranty
- MX FUEL™ CARRY-ON™ 3600W/1800W Power Supply KitMXF002-2XC
- 3600 Peak Watts and 1800 Running Watts for High Draw Tools
- Pure Sine Inverter Protects Sensitive Electronics
- No Emissions and Durable Roll Cage, Indoor or Outdoor Use
- Ground Fault Isolated for Jobsite Use
- Powered by 1 Battery or 2 to Double the Runtime
- Integrated Charger to Charge up to Two MX FUEL™ Batteries
- Push Button Start. No Pull Starts.
- Compact Footprint for Use in Any Workspace
- Compatible with ONE-KEY™ to Track and Manage
- MX FUEL™ REDLITHIUM™ XC406 Battery PackMXFXC406
- Fuel gauge onboard, displays remaining runtime for less downtime on the job
- Carrying Handle
- Rubber Overmold
- Fully compatible with all MX FUEL™ equipment
- MX FUEL™ XC406 Battery/Charger Expansion KitMXFC-2XC
- Fuel gauge onboard, displays remaining runtime for less downtime on the job
- Carrying Handle
- Rubber Overmold
- 5X More Protective Rubber Overmold in Impact Zones
- REDLINK™ Intelligence: Optimizes performance, compatibility, and battery lifespan
- Capable of charging in 90 minutes
- MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Battery PackMXFXC608
- 33% more runtime vs. MX FUEL™ REDLITHIUM™ XC406 (XC6.0) in a lighter weight design.
- 45 min charge with the MX FUEL™ Super Charger
- COOL-CYCLE™ Capable. COOL-CYCLE™ Active Cooling System provides high speed cooling for less downtime
- Longest life for the most recharges and best performance over the life of the pack
- REDLITHIUM™ FORGE™ provides the most powerful, fastest charging, and longest life batteries within REDLITHIUM™
- Best protection from jobsite, weather, and environmental conditions
- Compatible with all MX FUEL™ equipment and chargers
- Upgraded venting design for max cooling with COOL-CYCLE™ capable chargers
- Active cooling feature works with chargers that have COOL-CYCLE™ capability
- ONE-KEY™ compatible: Ability to customize, track, and manage tools for increased productivity and protection of users investment
- Improved handle design for easy carrying
- 5X more rubber overmold in impact zones for maximum protection
- Onboard fuel gauge displays remaining charge
- 2-year warranty
- Includes: 1 MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 battery pack
- MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery PackMXFHD812
- 2X more runtime vs. MX FUEL™ REDLITHIUM™ XC406 (XC6.0)
- 65 minute charge with the MX FUEL™ Super Charger
- COOL-CYCLE™ Active Cooling System is capable of providing high-speed cooling for less downtime
- Longest life for the most recharges and best performance over the life of the pack
- REDLITHIUM™ FORGE™ provides the most power, fastest charging, and longest life batteries within REDLITHIUM™
- Compatible with all MX FUEL™ equipment and chargers
- Best protection from jobsite, weather, and environmental conditions
- Upgraded venting design for max airflow from COOL-CYCLE™ capable chargers
- Active cooling feature works with chargers that have COOL-CYCLE™ capability
- ONE-KEY™ compatible: Ability to customize, track, and manage tools for increased productivity and protection of users investment
- Improved handle design for easy carrying
- 5X more rubber overmold in impact zones for maximum protection
- Onboard fuel gauge displays remaining charge
- 2-year warranty
- Includes: (1) MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 battery pack
- MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 Battery/Super Charger Expansion KitMXFSC-1HD12
- 2X more runtime with MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 vs MX FUEL™ XC406 (XC6.0)
- 65 minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 and Super Charger
- Full battery & charger compatibility with the entire MX FUEL™ equipment system
- REDLITHIUM™ FORGE™ batteries provides the most power, fastest charging and longest life
- Super Chargers are Milwaukee’s fast chargers for MX FUEL™ batteries
- Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 & MX FUEL™ Super Charger are COOL-CYCLE™ Capable
- COOL-CYCLE™ Active Cooling System is capable of providing high-speed cooling for less downtime
- Active cooling feature works with chargers and batteries that have COOL-CYCLE™ capability
- REDLINK™ Intelligence: Our circuitry provides optimized performance and overload protection using total system communication between tool, battery, and charger
- Both the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 & MX FUEL™ Super Charger are ONE-KEY™ compatible: ability to customize, track, and manage tools for increased productivity and protection of users investment
- MX FUEL™ Super Charger features ONE-KEY™ with adjustable wattage to maximize outlet power onsite
- 2 year battery warranty, 2 year charger warranty
- Kit Includes: (1) MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 & (1) MX FUEL™ Super Charger
- MX FUEL™ Super ChargerMXFSC
- Charge Up to 2X Faster vs MX FUEL™ Standard Charger
- Charge MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 in 65 Minutes; Charge MX FUEL™ REDLITHIUM™ FORGE™ XC 8.0 in 45 Minutes
- COOL-CYCLE™ Active Cooling System provides high-speed cooling for less downtime. Active cooling feature works with batteries that have COOL-CYCLE™ capability.
- Compatible with all MX FUEL ™ Batteries
- Charge MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 in 65 Minutes
- Charge MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 in 45 Minutes
- Charge MX FUEL™ XC6.0 in 45 Minutes
- Integrated ONE-KEY™ for tracking, management, and adjustable wattage feature
- REDLINK™ Intelligence: Charger communicates with the battery pack to ensure optimized performance and maximize runtime
- Integrated carrying handle
- Single port
- Power Source: AC
- 2 Year Warranty
- Includes (1) MX FUEL™ Super Charger
- MX FUEL™ CHARGERMXFC
- Charges All MX FUEL™ Batteries
- Charges MX FUEL™ REDLITHIUM™ XC406 Battery in 90 Minutes
- Charges MX FUEL™ REDLITHIUM™ CP203 Battery in 45 Minutes
- REDLINK™ Intelligence: optimizes charge rates based on battery type and temperature providing the best combinations of charge time and pack lifespan
- Internal Fan: Maximizes Charger Performance and Lifespan
- On-Board Charge Indicator
- Integrated Carry Handle
- AC Charger
- Single Port
- 2 year Warranty
EXPLORE THE SYSTEMS
© 2025 by Milwaukee Tool. All rights reserved.