2020-06-29

Milwaukee Tool Reveals New Masonry, Concrete, and Tile Drilling Accessories

MILWAUKEE, WI – Milwaukee Tool demonstrates their commitment to delivering productivity-enhancing accessory solutions with the introduction of their new MX4™ SDS Drill Bits, SLEDGE™ SDS Chisels, Hammer Drill Bits, SHOCKWAVE™ Multi-Material Drill Bits, and Glass and Tile Bits.

“Now offering a full lineup of masonry and concrete solutions, Milwaukee Tool continues to create products that will perform in the toughest applications, and our accessories are no exception,” said David Lincoln, Director of Product Marketing for Milwaukee Tool. “We are setting the bar once again with our new SDS accessories and drill bits, delivering a complete drilling solution for concrete and masonry applications.”

MX4™ 4-Cutter Rotary Hammer Drill Bits

Equipped with solid head carbide, the new MX4™ 4-Cutter SDS-Plus and SDS-Max Rotary Hammer Drill bits deliver up to 5X longer life in concrete with rebar. The new bits are designed with rebar guards for maximum durability and sharp centering tips for exact spot drilling in concrete and metal decking. The 4-Cutter design prevents lock-up in rebar to reduce downtime while variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per charge. Complete with a wear mark indicator, the MX4™ 4-Cutter Drill Bits show users when the bit no longer meets ANSI requirements*. The new Rotary Hammer Drill Bits will be available in diameters from 5/32” up to 1-1/4” for SDS-Plus and 3/8” up to 2” for SDS-Max.

SLEDGE™ Chisels

Designed to stay sharper longer, Milwaukee’s new SDS-Plus and SDS-Max SLEDGE™ Chisels increase productivity and deliver maximum life. Reinforced edges deliver maximum durability and minimize wear throughout the life of the chisel. Designed with high-grade forged steel for maximum durability and extended life, the Milwaukee® SLEDGE™ Chisels last longer in concrete demolition without the hassle of re-sharpening or re-hardening. The SLEDGE™ Family lineup is complete with Bull Points, Flat Chisels, Scaling Chisels, Tile Chisels and a Scraping Chisel as well as Mortar Knives and a Floor Scraper.

Carbide Hammer Drill Bits

Delivering up to 5X longer life in concrete and up to 2X faster drilling into masonry materials, the new SHOCKWAVE™ Carbide Hammer Drill Bits are engineered with a precision ground tip for faster starts and less walking. The wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” hex shank, the new SHOCKWAVE™ Carbide Hammer Drill Bits are the ideal solution for drilling in masonry with impacts and hammer drills/drivers and will be available in sizes up to ½”. In addition to the SHOCKWAVE™ Hammer Drill Bits, new Milwaukee® Carbide Hammer Drill Bits will come equipped with a 3-flat shank for better grip and control. The new Carbide Hammer Drill Bits are optimized for use with cordless and corded hammer drill/drivers and will be available in sizes up to 1”.

SHOCKWAVE™ Carbide Multi-Material Drill Bits

 Designed to tackle a variety of materials, the new SHOCKWAVE™ Carbide Multi-Material Drill Bits are the most versatile bits on the market, capable of drilling through brick, block, concrete, steel, aluminum, ceramic tile, backerboard, wood, PVC, and drywall. With an aggressive multi-grind carbide tip, these bits deliver up to 10X longer life in stacked materials and up to 85% faster drilling speeds in metal. These multi-material bits are the ideal all-in-one solution with a ¼” hex shank for use with impacts, drill/drivers, and hammer drills and will be available in sizes up to ½”.

Tile and Stone Bits

The new Tile and Natural Stone Drill Bits deliver up to 2X life in granite, stone, ceramic tile and glass. An aggressive 8-grind carbide head delivers up to 20% faster drilling and a reinforced tip protects the head, providing the durability needed for use in hammer drill mode. These bits can be used in hammer drill mode or drill-only mode, are not recommended for use on porcelain tile, and will be available in sizes up to ½”.

Glass and Tile Bits

Equipped with an exact start tip for clean holes and minimal bit walking, the new Milwaukee® Glass and Tile Bits are engineered with sharpened carbide to drill faster than the standard alternative. A reinforced carbide head provides increased durability when high-speed drilling into tile and glass. These bits are designed to be used with drill-drivers only, are not recommended for use on porcelain tile, and will be available in sizes up to ½”.  Milwaukee Tool is dedicated to providing a full range of tile drilling solutions, equipping users with the confidence to complete any tile drilling application.

 

*Meets ANSI B212.15 to fit common anchors.

 

Suggested Sample List

Rotary Hammer Drill Bits

SDS-PLUS 4CT MX4™ 3/8” x 4” x 6”                                                48-20-7351

SDS-PLUS 4CT MX4™ 5/8” x 6” x 8”                                                48-20-7200

SDS-MAX 4CT MX4™ ¾” x 18” x 21”                                                48-20-3932

Chisels

SDS-PLUS SLEDGE™ 10” Bull Point Chisel                                    48-62-6050

SDS-PLUS SLEDGE™ ¾” x 10” Flat Chisel                                      48-62-6052

SDS-PLUS SLEDGE™ 1-1/2” Scaling Chisel                                    48-62-6056

SDS-MAX SLEDGE™ 16” Bull Point Chisel                                      48-62-4250

SDS-MAX SLEDGE™ 1” x 16” Flat Chisel                                        48-62-4252

SDS-MAX SLEDGE™ 3” Scaling Chisel                                            48-62-4087

Hammer Drill Bits

¼” x 4” x 6” SHOCKWAVE™ Carbide Hammer Drill Bit                    48-20-9011

3/8” x 4” x 6” SHOCKWAVE™ Carbide Hammer Drill Bit                  48-20-9021

½” x 4” x 6” SHOCKWAVE™ Carbide Hammer Drill Bit                    48-20-9030

Multi-Material Drill Bits

¼” SHOCKWAVE™ Carbide Multi Material Drill Bit                          48-20-8886

3/8” SHOCKWAVE™ Carbide Multi Material Drill Bit                        48-20-8890

Tile and Stone Bits

¼” Natural Stone Bit                                                                           48-20-8992

½” Natural Stone Bit                                                                           48-20-8995

Glass and Tile Bits

¼” Glass & Tile Bit                                                                              48-20-8982

½” Glass & Tile Bit                                                                              48-20-8985

About Milwaukee Tool

Milwaukee Tool, founded in 1924, is a global leader in delivering innovative solutions to the professional construction trades that offer increased productivity and unmatched durability. Whether it is through their world-leading M12™, M18™, and MX FUEL™ cordless systems, the ground-breaking performance of their M12 and M18 FUEL™ products, jobsite lighting, time-saving accessories, or innovative hand tool and storage products, Milwaukee® is dedicated to delivering a steady stream of advanced, trade-specific solutions. Milwaukee Tool is a Brookfield, Wisconsin-based subsidiary of Techtronic Industries Co. Ltd. (TTI) (HKEx stock code: 669, ADR symbol: TTNDY). For more information on the full line of Milwaukee® products, please call 1-800-SAWDUST or visit www.milwaukeetool.com.